127 lines
4.4 KiB
C++
127 lines
4.4 KiB
C++
#include <Arduino.h>
|
|
|
|
#ifdef ESP32
|
|
#include <WiFi.h>
|
|
#else
|
|
#include <ESP8266WiFi.h>
|
|
#endif
|
|
|
|
#include <Alex2ESP.h>
|
|
|
|
// Define constants for WiFi and Alexa Client configuration
|
|
const char *WIFI_SSID = "";
|
|
|
|
const char *ALEXA_USERNAME = "";
|
|
const char *ALEXA_PASSWORD = "";
|
|
const char *ALEXA_ROOT_TOPIC = "";
|
|
|
|
// Create the Alexa client object
|
|
Alex2ESP alexClient;
|
|
AlexaDevice *device1;
|
|
|
|
// Initial state for the blinds (PowerController)
|
|
PowerController outputState = PowerController::OFF;
|
|
|
|
void setup()
|
|
{
|
|
// Initialize the LED as output
|
|
pinMode(LED_BUILTIN, OUTPUT);
|
|
|
|
// Initialize serial communication for debugging
|
|
Serial.begin(74880);
|
|
|
|
// Connect to Wi-Fi
|
|
WiFi.mode(WIFI_STA);
|
|
WiFi.begin(WIFI_SSID);
|
|
|
|
Serial.print("[WIFI] Connecting to WiFi");
|
|
|
|
while (WiFi.status() != WL_CONNECTED)
|
|
{
|
|
Serial.print(".");
|
|
delay(100);
|
|
}
|
|
|
|
Serial.println();
|
|
Serial.printf("[WIFI] Connected to SSID: %s, IP address: %s\n", WiFi.SSID().c_str(), WiFi.localIP().toString().c_str());
|
|
|
|
// Initialize the Alexa client
|
|
alexClient.begin(ALEXA_USERNAME, ALEXA_PASSWORD, ALEXA_ROOT_TOPIC);
|
|
|
|
String deviceName="Bedroom Blinds";
|
|
|
|
// Register a new device with a unique ID and name
|
|
device1 = alexClient.getDevice(deviceName, "ESP-01");
|
|
|
|
// Set the device's display category to LIGHT
|
|
device1->setDisplayCategory(DisplayCategory::LIGHT);
|
|
|
|
//a power controller will allow us to "turn on/off" the blinds (not really usefull but is possable)
|
|
device1->addCapability(AlexaInterfaceType::POWER_CONTROLLER);
|
|
|
|
// Add a toggle controller capability to the device
|
|
AlexaInterface* toggleController=device1->addCapability(AlexaInterfaceType::TOGGLE_CONTROLLER);
|
|
|
|
//toggle controllers are unique in that they require some additinal attrabutes by default we first need to set an instance name
|
|
toggleController->setInstance("ESP-01.Toggle");
|
|
|
|
//we also need to set a name for the interface, this is a sub device listed under the main device name
|
|
//to allow open/close commands as well as on/off commands we can use the same name as device name
|
|
toggleController->addFriendlyName(deviceName.c_str(),"en-US");
|
|
|
|
// Example of adding action mappings to map open/close to on/off
|
|
ActionMapping closeMapping({AlexaActions::Close}, "TurnOn");
|
|
|
|
ActionMapping openMapping({AlexaActions::Open}, "TurnOff");
|
|
// the full supported list of alexa action mappings can be found on
|
|
// https://developer.amazon.com/en-US/docs/alexa/device-apis/alexa-discovery-objects.html#action-mapping
|
|
//note, only 'generic controller interffaces support action mappings for a full list visit
|
|
//https://developer.amazon.com/en-US/docs/alexa/device-apis/generic-controllers.html
|
|
|
|
|
|
toggleController->addActionMapping(closeMapping);
|
|
toggleController->addActionMapping(openMapping);
|
|
|
|
// Register event listener for "ReportState" directive
|
|
device1->registerEvent("ReportState", [](const JsonDocument &directive, const AlexaInterfaceType &type)
|
|
{
|
|
|
|
Serial.println("Report state requested.");
|
|
|
|
// Build and send status report
|
|
device1->buildStatusMessage(directive["header"]["correlationToken"])
|
|
.AddHealthProp(EndpointHealth::OK)
|
|
.AddToggleControllerProp(outputState,"ESP-01.Toggle")
|
|
.AddPowerControllerProp(outputState)
|
|
.send(); });
|
|
|
|
// Register event listener for "Event" directive to handle state changes
|
|
device1->registerEvent("Event", [](const JsonDocument &directive, const AlexaInterfaceType &type)
|
|
{
|
|
if (type == AlexaInterfaceType::TOGGLE_CONTROLLER||type == AlexaInterfaceType::POWER_CONTROLLER) {
|
|
if (directive["header"]["name"] == "TurnOn") {
|
|
outputState = PowerController::ON;
|
|
Serial.println("Turning ON");
|
|
} else if (directive["header"]["name"] == "TurnOff") {
|
|
outputState = PowerController::OFF;
|
|
Serial.println("Turning OFF");
|
|
}
|
|
|
|
// Send the updated state after change
|
|
device1->buildStatusMessage(directive["header"]["correlationToken"], true)
|
|
.AddHealthProp(EndpointHealth::OK)
|
|
.AddToggleControllerProp(outputState,"ESP-01.Toggle")
|
|
.AddPowerControllerProp(outputState)
|
|
.send();
|
|
} });
|
|
}
|
|
|
|
|
|
void loop()
|
|
{
|
|
// Process Alexa client communication
|
|
alexClient.loop();
|
|
|
|
// Update the state of the LED based on the power controller state
|
|
digitalWrite(LED_BUILTIN, outputState != PowerController::ON);
|
|
}
|