Examples as Arduino sketches: one folder per device type, each its own endpointId, Wi-Fi with a timeout

Light, DimmableLight, ColorTemperatureLight, ColorLight, TemperatureSensor, ContactSensor, Blind,
Thermostat, Lock, Scene, Doorbell and MultiDevice on the 2.0 API: addCapability(row, instance), one
onDirective() handler, the report helpers, ChangeReports from loop(), a deferred answer for the lock.
Wi-Fi is waited for 30 s, then the sketch says what to check and carries on.

examples/README.md has what each sketch does, its limits and the measured sizes for d1_mini: Light
takes 30,616 bytes of static RAM and 332,565 of flash; all 17 sketches build with 0 warnings.
test/test_examples compares the discovery object of every new sketch: 147 host tests (were 135).
The sketches were compiled, not run on a board.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

examples/MultiDevice/MultiDevice.ino

@@ -0,0 +1,106 @@
+// MultiDevice: two lamps on one board, two Alexa endpoints, one handler (Alexa.PowerController).
+//
+// Every device has its own endpoint id and name. Both get the same handler; the directive says which device it
+// is for.
+#include <Arduino.h>
+#include <ESP8266WiFi.h>
+#include <Alex2ESP.h>
+
+// Wi-Fi and the credentials of your Alex2MQTT account
+const char *WIFI_SSID = "";
+const char *WIFI_PASSWORD = "";
+
+const char *ALEXA_USERNAME = "";
+const char *ALEXA_PASSWORD = "";
+const char *ALEXA_ROOT_TOPIC = "";
+
+const int LAMP_COUNT = 2;
+const uint8_t LAMP_PINS[LAMP_COUNT] = {5, 4}; // D1 and D2 on a Wemos D1 mini, high = lit
+const char *const LAMP_NAMES[LAMP_COUNT] = {"Left Lamp", "Right Lamp"};
+const char *const LAMP_IDS[LAMP_COUNT] = {"esp-multi-left", "esp-multi-right"};
+
+Alex2ESP alexa;
+AlexaDevice *lamps[LAMP_COUNT];
+bool lampOn[LAMP_COUNT] = {false, false};
+
+// Joins the Wi-Fi network and returns after 30 s at the latest. Without a connection the sketch carries on: the
+// ESP8266 keeps trying, and alexa.loop() opens the MQTT session once Wi-Fi is up.
+void connectWiFi()
+{
+  WiFi.mode(WIFI_STA);
+  WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
+  Serial.printf("\n[WIFI] Connecting to \"%s\"\n", WIFI_SSID);
+
+  unsigned long started = millis();
+  while (WiFi.status() != WL_CONNECTED && millis() - started < 30000)
+  {
+    delay(100);
+  }
+
+  if (WiFi.status() == WL_CONNECTED)
+  {
+    Serial.printf("[WIFI] Connected, IP address %s\n", WiFi.localIP().toString().c_str());
+  }
+  else
+  {
+    Serial.printf("[WIFI] No connection after 30 s (status %d): check WIFI_SSID and WIFI_PASSWORD. Still trying.\n",
+                  WiFi.status());
+  }
+}
+
+// The state of one lamp: what the answer to a directive and the answer to ReportState carry
+void sendState(AlexaStatusMessage message, int lamp)
+{
+  message.addHealthProp(EndpointHealth::OK)
+      .addPowerControllerProp(lampOn[lamp] ? PowerController::ON : PowerController::OFF)
+      .send();
+}
+
+void onDirective(AlexaDirective &directive)
+{
+  int lamp = directive.device == lamps[1] ? 1 : 0;
+
+  if (directive.isReportState())
+  {
+    sendState(directive.stateReport(), lamp);
+    return;
+  }
+
+  if (directive.type == AlexaInterfaceType::POWER_CONTROLLER && (directive.is("TurnOn") || directive.is("TurnOff")))
+  {
+    lampOn[lamp] = directive.is("TurnOn");
+    digitalWrite(LAMP_PINS[lamp], lampOn[lamp] ? HIGH : LOW);
+    sendState(directive.response(), lamp);
+    return;
+  }
+
+  directive.error(AlexaErrorType::INVALID_DIRECTIVE, "This lamp switches on and off").send();
+}
+
+void setup()
+{
+  Serial.begin(74880);
+
+  connectWiFi();
+
+  // MQTT user name, MQTT password, root topic
+  alexa.begin(ALEXA_USERNAME, ALEXA_PASSWORD, ALEXA_ROOT_TOPIC);
+
+  for (int i = 0; i < LAMP_COUNT; i++)
+  {
+    pinMode(LAMP_PINS[i], OUTPUT);
+    digitalWrite(LAMP_PINS[i], LOW);
+
+    // The name Alexa shows, and the id of the endpoint: every device of an account has its own
+    lamps[i] = alexa.getDevice(LAMP_NAMES[i], LAMP_IDS[i]);
+    lamps[i]->setDisplayCategory(DisplayCategory::LIGHT);
+    lamps[i]->addCapability(AlexaInterfaces::PowerController);
+    lamps[i]->addCapability(AlexaInterfaces::EndpointHealth);
+    lamps[i]->onDirective(onDirective);
+  }
+}
+
+void loop()
+{
+  alexa.loop();
+}